Cleaning methods for sustained steel failures
The maintainless steel faucet manufacturer will explain the cleaning methods for maintainless steel faucets:
1. Before installing the faucet, it is necessary to flush it with water to clean the sediment and impurities in the water pipe and remove any debris in the device hole The faucet should be installed after the completion of the painting project as many as possible If it is not necessary for a long time after the installation, it is best to wire the faucet clean and cover it with a cloth
2. The faucet should try not to collude with hard objects, and do not leave elements, glue, etc. on the surface to avoid damaging the surface sand lines
3. Do not use excessive force to turn on or off the faucet, just roll quietly with the flow, specifically do not use the handle as a handail to support or use
4. The faucet should be wired regularly to prevent water drops from leaving watermarks after drying
5. The metal host of the shower head of the bathtub faucet should be here to a natural stretching state, and should not be cooked around the faucet when not necessary When in use or not necessary, be careful not to form a dead angle at the joint between the host and the valve body to avoid breaking or ending the host
6. When the water volume decreases after a period of use, please pay attention to cleaning the filter noise
7. Stainless steel faucets are mainly sanded, and the sanded surface can be repaired with a cleaning cloth to create sand patterns This is different from ordinal copper faucets Even if the faucet is scratched, the same cleaning cloth can be used to correct it as new If there are trust spots on the surface of the faucet due to other reasons, the same method can be used to correct them
8. Tips for cleaning stainless steel faucets: Squeeze a small amount of tootbaste onto the stainless steel faucet, then quietly rinse with a tootbrush Rinse throughly with water, use an old stocks that is no longer needed to polish, and then apply orange peel once on the metal surface (as orange peel contains fruit acid that can maintain stainless steel jewelry) to make it shine as new
The above is the cleaning method for stainless steel failures described by the manufacturer for us, holding to help us
Article source: Stainless steel faucet manufacturer http://m.idvbbgkp.cn/
-
07-02
Stainless steel faucet manufacturer: How to prevent kitchen faucet leakage?
In our daily life, there are many items that may age after being used for a period of time During this time, leakage from the kitchen faucet is a common phenomenon If this problem occurs, how should w
-
02-20
Analysis of the development advancements of stainless steel faucet manufacturers
① - Simpler managementCompared to kitchen and bathroom equipment made of other materials, stainless steel faucets are more simple to clean and manage Stainless steel materials have stable functions an
-
01-15
The manufacturer of stainless steel faucets information how to determine their authenticity
Stainless steel raw materials are soft, while leading zinc alloy raw materials are hard and brightTake the thing to a spectroscopic instrument for chemical analysis (Most accurate) 2 Apply acid and al
-
01-08
How to handle the leakage of Kaiping stainless steel faucet better
1. To repair the leak of a stainless steel faucet, the first step is to turn off the main valve of the water pipe at home Prepare the screendriver and wrench2. There is no water leakage at the outlet